SNIKKI TOOLBELTS


Proofed and acknowledged by craftsmen.  With the right equipment, you have your most important tools close to hand while at the same time reducing strain on your body.    Scroll down to find our SNIKKI- guide.

SNIKKI GUIDE - MAKE YOUR OWN TOOLBELT


Choose between our originalbelts for carpenters, electrician,   fitters, installers and  sheet metal workers.  Or do your own Ergo-belt with material pockets and tool holders you might need in your professional.
1. Choose a belt
Choose an Ergo belt, soft padded belt or a regular leather belt. For extra relief for your shoulders and greater comfort, combine with our tool braces.
2. Add pockets
Choose the pouches and tool holders you require. The comfort system is flexible and you can easily replace pouches and holders
QUICK-GRIP - this is how to fasten our pouches and holders

Place the part with snap fastenings over your belt.  Press and then fasten on the back. The  metal riverts should be visable if you have fastened  the pouch or holder correctly.


CHoose your occaption to find suggestions on tool belts

Carpenter | scaffolders |
reinforcer | tin-smith

electricians

Janitor | maintenance technician


carpenterS, SCRAFFOLDERS, FITTERS

ERGO-SYSTEM IN LIGHTWEIGHT MATERIAL

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with ergonomic design made in durable dirt and water repellent lightweight material.  

  • Wide comfortable shoulder strap and backrest with elastic straps, also in durable  dirt and water repellent material.

  • Tool pocket specially designed for carpenters, fitters and stand builders with 4 tool pockets with brackets and knife holders.

  • Material pocket with two pockets for screws and nails.

  • Material pocket suitable for nail and screw boxes. A stable pocket that makes it easy to lift in and out of boxes.

  • Holder for laser meter or similar instrument. Lock with velcro closure.

  • Holder for power tools.

ERGO-SYSTEM IN LEATHER WITH BLACK LEATHER POCKETS

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Tool pocket specially designed for carpenters, fitters, armor and stand builder with four tool pockets, hammer holder, knife holder and additional tool holder for eg Burton key.

  • Material pockets with two pockets for nails and nails, and knife holder.

  • Holder for power tools.

ERGO-SYSTEM IN LEATHER WITH SPLIT LEATHER POCKETS

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Tool pocket specially designed for carpenters, fitters, armor and stand builder with four tool pockets, hammer holder, knife holder and additional tool holder for Burton key.

  • Material pocket with two pockets for screws and nails    and knife holder.

  • Material pocket for screw, bolt, nail etc.

  • Holder for power tools.


ELECTRICIAN, INSTALLER

ERGO-SYSTEM IN LIGHTWEIGHT MATERIAL

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with ergonomic design made in dirt and water repellent lightweight material.  

  • Wide comfortable shoulder strap and backrest with elastic straps, also in  dirt and water repellent material.

  • Toolpocket specially developed for electricians, with tool pockets, holders for screw drivers, and tape.

  • Material pouch with two pouches for screws and nails etc.  

  • Holder for instruments e.g. laser measurement tool with flap and velco fastening.

  • Holder for power tools.

ERGO-SYSTEM IN LEATHER WITH BLACK LEATHER POCKETS

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Toolpocket specially developed for electricians, with tool pockets, holders for screw drivers, and tape.

  • Material pouch with two pouches for screws and nails etc.  

  • Holder for power tools.

ERGO-SYSTEM IN LEATHER WITH SPLIT LEATHER POCKETS

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Toolpocket specially developed for electricians, with tool pockets, holders for screw drivers, and tape.

  • Material pouch with two pouches for screws and nails etc.  

  • Holder for power tools.


Janitor, maintenance technician

ERGO-SYSTEM IN LIGHTWEIGHT MATERIAL

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   
​​​​​​​

  • Belt with ergonomic design made in dirt and water repellent lightweight material.  

  • Wide comfortable shoulder strap and backrest with elastic straps, also in  dirt and water repellent material.

  • Tool pocket    with pockets for screw drivers, pilers, cutters and nippers.   

  • Tool pocket with holders for hammer, folding rule, pencil and  angle iron etc.

  • Material pouch with two pouches for screws and nails etc.

  • Holder for power tools.  

ERGO-SYSTEM DURABLE STRONG LEATHER

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   
​​​​​​​

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Tool pocket    with pockets for screw drivers, pilers, cutters and nippers.   

  • Tool pocket with holder for hammer, folding rule, pencil and  angle iron etc.

  • Material pouch with two pouches for screws and nails etc.

  • Holder for power tools.  

ERGO-SYSTEM IN LEATHER WITH SPLIT LEATHER POCKETS

Combine our Ergo toolbelt with different pockets and wear it with our without braces.   

  • Belt with an outside of  heavy duty leather, durable strap in nylon and metal buckle. The inside is made of soft leather that conforms to the body so no hard edges   chafes and irritates.

  • Wide and comfortable shoulder straps that will not slip off while kneeling. Provies ideal weight distribution and mobility.

  • Tool pocket    with pockets for screw drivers, pilers, cutters and nippers.   

  • Tool pocket with holder for hammer, folding rule, pencil and  angle iron etc.

  • Material pouch with two pouches for screws and nails etc.

  • Holder for power tools.  


HIGH QUALITY, PROUD TRADITION AND CREATIVE INNOVATION

MADE IN SWEDEN

All our black toolbelts, material pouchers and holdera are made in Sweden. Theese products are made of specially developed soft leather that has a durable and water repellent surface.

SPECIALLY DEVELOPED SOFT LEATHER

All our products are made of high-quality leather that stays soft even when it's cold. The inside is specially treated so it stays comfortable and does not chafe the hand. Our leather ergo belt has soft vegetable-tanned leather on the inside so it is comfortable closest to the body.   

TRADITION FROM DALECARLIA

Just by Lake Siljan in Dalecarlia in Sweden, you will find the Snikki production site. We have more  than 50 years experience of making and creating tool belts. All our products are developed in close collaboration with craftsmen and high quality has always been our guiding star.